Click on any photo to enlarge it and view the full slideshow. To return to this page, press [ESC].

Top-mounted on timber fence

This is the most common way to install an Oscillot system.

Oscillot (standard grey) on top of flat-top timber fence in Auckland

Oscillot on top of flat-top timber fence

Oscillot on top of a horizontal timber fence

Oscillot on top of horizontal timber fence

Oscillot (standard 'merino' colour) on top of a timber gate and fence in Wellington, with metal banding on gate post

Oscillot on top of timber fence plus metal banding

Oscillot on timber fence plus polycarbonate shield to onclose the exposed rail near top of fence which could be a jumping platform for cat

Oscillot on top of timber fence plus polycarbonate

Face-mounted on timber fence

This method offers maximum effectiveness to keep your cat contained, but will not keep other cats from entering your yard.
It is ideal if your fence has posts that extend above the top rail, which could necessitate using many extra Oscillot posts.
And it keeps your Oscillot system out of sight from neighbours.

Oscillot on face of a timber fence in Auckland

Oscillot on face of a timber fence

Oscillot on face of a timber fence

Oscillot on face of a timber fence

Oscillot (custom colours) on face of a timber fence in Auckland

Oscillot on face of a timber fence

Oscillot on face of a timber fence in Auckland. Face mounting was necessary due to the fence posts extending above the top rail of the fence.

Oscillot on face of a timber fence

Bracket-mounted on timber fence

Brackets are another way of dealing with fences that have posts extending above the top rail.

Bracket-mounted Oscillot (right) and face-mounted (left, out of sight of neighbour) on a timber fence in Auckland

Oscillot on brackets on a timber fence

Other types of fence

Oscillot installed on an aluminium fence in Auckland

Oscillot on an aluminium fence

Oscillot installed on a brush fence

Oscillot on a brush fence

Oscillot installed on a colorbond fence

Oscillot on a colourbond fence

Special situations

  • Timber fences with a rail less than 400mm below the top will need clear polycarbonate sheet attached to the rail so that your cat cannot use it as a platform from which to jump over the Oscillot®.
  • Low fences may require the addition of clear polycarbonate, trellis or other material to achieve the minimum recommended height of 1.8m.
  • Items such as air conditioners or water heaters near a fence may need attention too, as shown below.
Clear polycarbonate attached to top rail of timber fence

Clear polycarbonate attached to top rail of timber fence

Clear polycarbonate used to increase height of fence

Clear polycarbonate used to increase height of fence

Trellis increases the height of masonry fence

Trellis used to increse the height of a masonry fence

Clear polycarbonate placed over an air-conditioner to prevent climbing

Clear polycarbonate placed over an air-conditioner to prevent climbing